The Kingston Fury RGB 32GB (2x16GB) memory kit features 6000MHz CL36 DDR5 memory, a tested latency of 36-44-44, 1.35V, low-profile heat spreader and a sleek design, with support for XMP 3.0 and AMD EXPO, and is compatible with DDR5 Intel and AMD motherboards.
Features
32GB (16GB 2G x 64-Bit x 2 pcs.) DDR5-6000 CL36 288-Pin DIMM Kit Memory Module
Kingston FURY KF560C36BWE2AK2-32 is a kit of two 2G x 64-bit (16GB) DDR5-6000 CL36 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports AMD® EXPO v1.1 and Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 36-44-44 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
Factory Timing Parameters
- Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
- EXPO Profile #0: DDR5-6000 CL36-44-44 @1.35V
- EXPO Profile #1: DDR5-5600 CL40-40-40 @1.25V
- XMP Profile #1: DDR5-6000 CL36-44-44 @1.35V
- XMP Profile #2: DDR5-5600 CL40-40-40 @1.25V
Specifications
| Model Number |
KF560C36BWE2AK2-32 |
| CL(IDD) |
40 cycles |
| Row Cycle Time (tRCmin) |
48 ns (min.) |
| Refresh to Active/Refresh Command Time (tRFCmin) |
295 ns (min.) |
| Row Active Time (tRASmin) |
32 ns (min.) |
| UL Rating |
94 V - 0 |
| Operating Temperature |
0° C to +85° C |
| Storage Temperature |
-55°C to +100° C |
| Power Supply |
VDD = 1.1 V Typical
VDDQ = 1.1 V Typical
VPP = 1.8 V Typical
VDDSPD = 1.8 V to 2.0 V |
| Error Checking (ECC) |
On-Die ECC |
| Height |
1.66” (42.23 mm), w/heatsink |
Backed by a limited lifetime Kingston warranty.
