Suggestion box

Which new products would you like to see at PCCG?

Alpenfohn Black Ridge Low Profile CPU Cooler

84000000156
$69
In stock
Buy now, pay later!
The Alpenfohn Black Ridge Low Profile CPU Cooler features a black nickel plated design, 6 x 6mm heat pipes, a large heatsink with a 92mm PWM fan mounted on the bottom of the heatsink, and supports memory with a maximum height of 33mm.

Note for AMD-based systems: Mini ITX motherboards from the manufacturers ASrock, Gigabyte and MSI may cause assembly problems due to the arrangement of the components.



Features


  • Maximum 47mm height
  • VGA compatibility on mini-ITX motherboards
  • Black nickel plated
  • RAM compatibility for modules with a maximum height of 33mm
  • 6 x 6mm heatpipes
  • 92 x 92 x 15mm PWM fan
  • Secure mounting system for Intel / AMD

Performance and overclocking mode

Included are 2 different mounting brackets that allow you to mount a fan on the bottom of the heatsink, and a bracket for mounting a fan on the top of the heatsink for higher performance.

Compatibility mode (92 x 92 x 15 mm fan - To be purchased separately)


Performance mode (120 x 120 x 15 mm fan - To be purchased separetly)


Overclocking mode (120 x 120 x 25 mm fan - To be purchased seperately)


Important note for the use of the Alpenfohn Black Ridge Please note that the Alpenfohn Black Ridge is a powerful cooler with a max. 95W TDP for use in compact cases. The cooler has a 92 x 92 x 15mm fan for the best possible compatibility and overclocking of your CPU is not recommended. Increases in performance can be achieved by the "Performance" or "Overclocking" mode with alternative fan assembly. How much the cooling capacity can be increased depends on the fan used in each of these two modes and can not be precisely specified by Alpenfohn®.

Nevertheless, it may happen that despite the supported TDP of your CPU, the performance of the heat sink is not sufficient. This problem can occur with K, X, and C processor series when TDP limitation is disabled, or the board overclocks the CPU automatically due to improper settings. This can e.g. lead to higher power consumption.

Specifications


Heatsink:

Dimensions 140 x 120 x 47 mm
Cooling Power 95W TDP
Weight 438 g (incl. fan)
Heatpipes 6 x 6 mm heatpipes
Fins Aluminum
Baseplate Copper
Socket Compatibility Intel - LGA 115x/1200
AMD - Socket AM4

Thermal Compound:

Small tube included.

Fan:

Dimensions Ø 92 x 15 mm
Rated Voltage 12 VDC
Bearing Fluid Dynamic Bearing
Airflow 80.03 m³/h
Noise 14 - 37.6 dB(A)
Speed 800-2,800 RPM
Connector 4-Pin
Backed by a 1 year Alpenfohn warranty.

Customer reviews

Customer questions