Millions of Aussie Orders!

Millions of Aussie Orders!

The Ultimate Destination for Gamers & Enthusiasts

1HR Click & Collect

1HR Click & Collect

Available Mon - Sat!

Google Review Score

Google Review Score

Same Day Dispatch

Same Day Dispatch

On 1000's of Products!

Multi-Award Winners

Multi-Award Winners

Best Retailer & Builder

Suggestion box

Which new products would you like to see at PCCG?

Noctua NF-A12x15 120mm PWM 1850RPM Fan

NF-A12x15-PWM | Noctua
$45
In stock
Buy now, pay later!
Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A12x15 is a highly optimised, premium quality quiet fan in size 120x15mm. Its 15mm slim design makes the NF-A12x15 ideal for space-restricted applications such as low-profile CPU coolers or HTPC cases. The PWM version sports Noctua’s custom-designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise Adaptor to reduce the maximum speed during PWM control from 1850 to 1400rpm. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.



Features


15mm Slim Design

Having a thickness of only 15mm, the NF-A12x15 is much slimmer than standard 120x25mm fans. This makes it ideal for typical slim fan applications such as low-profile CPU coolers as well as for freeing up space by replacing standard 120x25mm fans on tower coolers, radiators or in PC cases.

Metal-Reinforced Motor Hub

With many larger-diameter slim fan designs, the shorter axis and bearing lead to a reduced running stability and lifespan. The NF-A12x15 uses a metal-reinforced motor hub, a measure typically found in high-speed industrial fans, in order to guarantee Noctua’s signature stability and longevity.

Flow Acceleration Channels

The NF-A12x15 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.

AAO Frame

Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency.

Stepped Inlet Design

Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.

Inner Surface Microstructures

With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

Integrated Anti-Vibration Pads

Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks.

Custom-Designed PWM IC with SCD

Supporting fully automatic PWM speed control, the fan uses Noctua's custom-designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds.

Stops at 0% PWM

When the fan is set to 0% PWM duty cycle by the motherboard or PWM fan controller, it will stop. This makes it ideal for creating setups with semi-passive cooling that automatically turn the fans off and thus run completely silent at idle if thermals allow.

Low-Noise Adaptor

The NF-A12x15 PWM is supplied with a (L.N.A.) that reduces the maximum fan speed from 1850 to 1400rpm. The L.N.A. can be used either to run the fan at a fixed speed of 1400rpm or to cap the maximum speed when using automatic PWM control.

Extensive Cabling Options

The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second fan to the same PWM fan header for automatic control.

SSO2 Bearing

The NF-A12x15 features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

6-Year Manufacturer’s Warranty

Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A12x15 features an MTTF of more than 150.000 hours rating and comes with a full 6-year manufacturer’s warranty.

Specifications


Model Number NF-A12x15-PWM
Size 120 x 120 x 15 mm
Mounting Hole Spacing 105 x 105 mm
Connector & Pin - Configuration 4 - Pin PWM
Cable Length 20 cm + 30 cm NA-EC1 Extension Cable
Bearing SSO2
Blade Geometry A - Series with Flow Acceleration Channels
Frame Technology AAO (Advanced Acoustic Optimisation)
Rotational Speed (+ / - 10 %) 1850 RPM
Rotational Speed with L.N.A. (+ / - 10 %) 1400 RPM
Min. Rotational Speed (PWM, + / - 20 %) 450 RPM
Airflow 94,2 m³ / h
Airflow with L.N.A. 70,8 m³ / h
Acoustical Noise 23,9 dB(A)
Acoustical Noise with L.N.A. 16,8 dB(A)
Static Pressure 1,53 mm H₂O
Static Pressure with L.N.A. 0,9 mm H₂O
Max. Input Power 1,56 W
Max. Input Current 0,13 A
Operating Voltage 12 V
Voltage PWM Signal 5 V
MTTF >150.000 h
Scope of Delivery Low - Noise Adaptor (L.N.A.)
4 - Pin Y - Cable
30 cm Extension Cable
NA-AV3 Anti - Vibration Mounts
Fan Screws
Warranty 6 Years
Backed by a 6-year Noctua warranty.

Customer reviews

Customer questions