LED Lighting
-
EK DRGB 6-Way Splitter Cable
The EK DRGB 6-Way Splitter Cable allows users to connect up to six digitally addressable RGB products to a single D-RGB (addressable) motherboard or controller header so that they can synchronize all their D-RGB products.…
$15
$15
In stock -
EK Loop D-RGB LED Strip 180mm
The EK Loop D-RGB LED Strip 180mm is a replacement individually addressable D-RGB strip with densely packed LEDs that is used for upgrading existing EK products. It replaces the standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump combos, and connects via…
$12
Check back later! -
EK Loop D-RGB LED Strip 200mm
The EK Loop D-RGB LED Strip 200mm is a replacement individually addressable D-RGB strip with densely packed LEDs that is used for upgrading existing EK products. It features 30 diodes for 15 diodes per 100m, and is 200mm long, can replace standard RGB strips in CPU bloc…
$22
$22
In stock -
EK Loop D-RGB LED Strip 400mm
The EK Loop D-RGB LED Strip 400mm is a replacement individually addressable D-RGB strip with densely packed LEDs that is used for upgrading existing EK products. It replaces the standard RGB strips in CPU blocks, monoblocks, reservoirs, and pump combos, and connects via…
$17
$17
In stock -
EK Loop RGB LED PCB Board 90mm
The EK Loop RGB LED PCB Board 90mm is a replacement RGB LED module on a hard PCB. It replaces the stick-out LED module in EK Quantum Vector GPU waterblocks. It is 90mm long and has an additional cable for the terminal LED's to connect to it, and is connected via a 4-pin…
$12
$12
In stock -
EK RGB 4-Way Splitter Cable
The EK-RGB 4-Way Splitter Cable allows users to connect up to four RGB products to one RGB source so that they can build an aesthetically beautiful lighting system. It features standard 4-pin RGB headers and the male-male connector pins are also included in the packagin…
$19
$19
In stock -
EK Twin 3mm LED Kit - Blue
This kit consists of two 3mm Blue LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Especially good combination with the EK Supreme Plexi waterblocks, which have pre-drilled holes for 3mm LEDs. Cable length: ~29cm approximately…
$6
$6
In stock -
EK Twin 3mm LED Kit - Green
This kit consists of two 3mm green LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Especially good combination with the EK Supreme Plexi waterblocks, which have pre-drilled holes for 3mm LEDs. Cable length: ~29cm approximatel…
$6
$6
In stock -
EK Twin 3mm LED Kit - Red
This kit consists of two 3mm red LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Especially good combination with the EK Supreme Plexi waterblocks, which have pre-drilled holes for 3mm LEDs. Cable length: ~29cm approximately.…
$6
$6
In stock -
EK Twin 3mm LED Kit - White
This kit consists of two 3mm white LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Especially good combination with the EK Supreme Plexi waterblocks, which have pre-drilled holes for 3mm LEDs. Cable length: ~29cm approximatel…
$6
$6
In stock -
EK Twin 5mm LED Kit - Blue
This kit consists of two 5mm Blue LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Cable length: ~29cm approximately. Plexi stop fitting not included.…
$6
$6
In stock -
EK Twin 5mm LED Kit - Green
This kit consists of two 5mm green LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Cable length: ~29cm approximately. Plexi stop fitting not included.…
$6
$6
In stock -
EK Twin 5mm LED Kit - Red
This kit consists of two 5mm red LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Cable length: ~29cm approximately. Plexi stop fitting not included.…
$6
$6
In stock -
EK Waterblocks Digital RGB LED strip 100mm
Replacement individually addressable RGB strip for upgrading existing EK products. The strip is 100mm long and can replace standard RGB strips in CPU blocks, reservoirs, combo units and pumps. The strip is connected via a 3pin connector to supported 5V headers that are…
$17
Check back later!