Millions of Aussie Orders!

Millions of Aussie Orders!

The Ultimate Destination for Gamers & Enthusiasts

1HR Click & Collect

1HR Click & Collect

Available Mon - Sat!

Google Review Score

Google Review Score

Same Day Dispatch

Same Day Dispatch

On 1000's of Products!

Multi-Award Winners

Multi-Award Winners

Best Retailer & Builder

Suggestion box

Which new products would you like to see at PCCG?

Hard Tubing

  • Corsair Hydro X Series XT Hardline Bending Toolkit for 12 & 14mm

    The Corsair Hydro X Series XT Hardline Bending Toolkit for 12 & 14mm allows you to create stunning hardline custom cooling loops. It contains high-quality tools you need to cut and bend 12mm or 14mm hardline tubing.…

    $69

    Check back later!
  • Corsair Hydro X Series XT HL 10/12mm Tubing 3 x 1m Crystal Clear

    Corsair Hydro X Series XT 10/12mm hardline tubing is made from PMMA material and comes in a clear/transparent colour. Comes as 3 x 1m tubing.…

    $29

  • Corsair Hydro X Series XT HL 10/12mm Tubing 3 x 1m Satin Black

    The Corsair Hydro X Series XT HL 10/12mm Tubing 3 x 1m Satin Black completes the connections between your Hydro X Series custom cooling equipment, making your system stand out with satin PMMA tubing. Comes with 3 tubes, which are each 1m in length.…

    $29

    Check back later!
  • Corsair Hydro X Series XT HL 10/14mm Tubing 3 x 1m Crystal Clear

    Corsair Hydro X Series XT 10/14mm hardline tubing is made from PMMA material and comes in a clear/transparent colour. Comes as a pack of 3 x 1m pieces.…

    $29

  • Corsair Hydro X Series XT HL 12mm Tube 3 x 1m Satin Transparent

    The Corsair Hydro X Series XT HL 12mm Tubing is made from PMMA material, and comes in a satin transparent finish. Comes as 3 x 1m tubing.…

    $29

  • Corsair Hydro X Series XT HL 12mm Tubing Satin White

    The Corsair Hydro X Series XT HL 12mm Tubing Satin completes the connections between your Hydro X series custom cooling equipment, making your system stand out with a satin white tube.…

    $29

  • Corsair Hydro X Series XT HL 14mm Tube 3 x 1m Satin Transparent

    The Corsair Hydro X Series XT HL 14mm Tubing is made from PMMA material, and comes in a satin transparent finish. Comes as 3 x 1m tubing.…

    $29

  • Corsair Hydro X Series XT HL 14mm Tubing 3 x 1m Satin Black

    The Corsair Hydro X Series XT HL 14mm Tubing is made from PMMA material, and comes in a satin black finish. Comes as 3 x 1m tubing.…

    $29

  • Corsair Hydro X Series XT HL 14mm Tubing Satin White

    The Corsair Hydro X Series XT HL 14mm Tubing Satin completes the connections between your Hydro X series custom cooling equipment, making your system stand out with a satin white tube.…

    $29

  • EK HD PETG Tube 10/12mm 500mm (2 pieces)

    The EK-HD PETG Tube is a solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. Designed for expert users only.…

    $11

    Check back later!
  • EK Loop 12mm 0.5m Metal Tube Nickel (2 Pieces)

    The EK-Loop Metal Tube 12mm 0.5m - Nickel (2 Pieces) is a pack of two 0.5-meter-long metal tubes with an outer diameter (OD) of 12mm. These brass tubes are perfect for builds utilizing straight runs from the components to an EK-Quantum Reflection distribution plate.…

    $59

  • EK Loop 14mm 0.5m Acrylic Hard Tube (2 Pieces)

    The EK-Loop Hard Tube is a solid type of extruded acrylic tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!…

    $25

    Check back later!
  • EK Loop 14mm 0.5m Metal Tube Nickel (2 Pieces)

    The EK-Loop Metal Tube 14mm 0.5m - Nickel (2 Pieces) is a pack of two 0.5-meter-long metal tubes with an outer diameter (OD) of 14mm. These brass tubes are perfect for builds utilizing straight runs from the components to an EK-Quantum Reflection distribution plate.…

    $45

  • EK Loop 16mm 0.5m Metal Tube Nickel (2 Pieces)

    The EK-Loop Metal Tube 16mm 0.5m - Nickel (2pcs) is a pack of two 0.5-meter-long metal tubes with an outer diameter (OD) of 16mm. These brass tubes are perfect for builds utilizing straight runs from the components to an EK-Quantum Reflection distribution plate.…

    $49

  • EK Loop Acrylic Hard Tube 10/12mm 0.8m Pre-Bent (6 Pieces)

    The EK Loop Acrylic Hard Tube 10/12mm Pre-Bent 90 Degrees is a 6-pack of 10/12 (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of lif…

    $115

  • EK Loop Acrylic Hard Tube 10/12mm 500mm (2 Pieces)

    The EK Loop Acrylic Hard Tube 10/12mm 500mm (2 pieces) is a solid type extruded acrylic tubing intended for use with EK-HD push-in adapters, and EK-HDC series compression fittings (sold separately). The tubing may be heat treated to achieve certain bends.…

    $19

    Check back later!
  • EK Loop Acrylic Hard Tube 12/16mm 0.8m Pre-Bent (6 Pieces)

    The EK Loop Acrylic Hard Tube 12/16mm Pre-Bent 90 Degrees is a 6-pack of 12/16mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend. Intended to help liquid cooling beginners, but also bring a quality of l…

    $139

  • EK Loop Acrylic Hard Tube 12/16mm 500mm (2 Pieces)

    The EK Loop Acrylic Hard Tube 12/16mm 500mm (2 Pieces) is a solid type extruded acrylic tubing intended for use with EK-HD push-in adapters, and EK-HDC series compression fittings (sold separately). The tubing may be heat treated to achieve certain bends.…

    $29

    Check back later!
  • EK Loop Modulus Hard Tube Bending Tool 12mm

    The EK-Loop Modulus 12mm hard tube bending tool is EK's approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 12mm diameter. These tools act as a mold, which helps the user to form the tubing in the desired shape. These tools are ma…

    $55

  • EK Loop Modulus Hard Tube Bending Tool 16mm

    The 16mm EK-Loop Modulus Hard Tube Bending Tool is the EK approach to an easy and straight forward way of bending hardline acrylic and PETG tubing of 16mm OD. These tools act as a mold, which helps the user to form tubing into the desired shape. These tools are made to…

    $55

  • EKWB Loop Bending Cord for 10mm ID Hard Tube 33cm

    The EK Loop Bending Cord for 10mm ID Hard Tube 33cm is a silicone cord for bending acrylic and PETG tubing. It features high heat and abrasion resistance, helping the tube not to deform while subjected to the high temperatures of a heat gun during the bending process.…

    $10

    Check back later!
  • EKWB Loop Bending Cord for 12mm ID Hard Tube 33cm

    The EK Loop Bending Cord for 12mm ID Hard Tube 33cm is a silicone cord for bending acrylic and PETG tubing. It features high heat and abrasion resistance, helping the tube not to deform while subjected to the high temperatures of a heat gun during the bending process.…

    $10

  • EK HD PETG Tube 12/16mm 500mm (2 Pieces)

    EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in or…

    $15

  • Thermaltake V-Tubler PETG Tube 16mm OD 500mm 4 Pack

    The Thermaltake V-Tubler PETG Tubing is manufactured from premium PETG which allows flexibility to route the tubes exactly the way you want. Designed with 5/8in (16mm) OD PETG tube adapter fittings, it gives users better mounting, easier fitting, and ideal flow. 4 pack…

    $19

  • EK HD Tube D.I.Y. Kit 10&12mm

    The EK HD Tube D.I.Y. Kit 10&12mm is a do-it-yourself modification kit for solid acrylic tubing with 10 and 12mm in inner diameter (ID). Using a heat gun and the enclosed silicone cord (rod) it is possible to make customised pieces of solid tubing. Use the hacksaw to cu…

    $35

  • Thermaltake Pacific Hard Tube Bending Kit

    The new hard tube bending tools offered by Thermaltake are especially designed for ID 1/2in (12mm) x OD 5/8in (16mm) hard tubing and provide everything makers needed when considering loop planning. Available in various angles, the laser-marked mandrels are made from sol…

    $125

  • Thermaltake Pacific Hard Tube Bending Kit for ID 10mm x OD 12mm

    The new hard tube bending tools offered by Thermaltake are especially designed for ID 10mm x OD 12mm hard tubes and provide everything makers need when considering loop planning. Available in various angles, the laser-marked mandrels are made from solid aluminium and ar…

    $125