Millions of Aussie Orders!

Millions of Aussie Orders!

The Ultimate Destination for Gamers & Enthusiasts

1HR Click & Collect

1HR Click & Collect

Available Mon - Sat!

Google Review Score

Google Review Score

Same Day Dispatch

Same Day Dispatch

On 1000's of Products!

Multi-Award Winners

Multi-Award Winners

Best Retailer & Builder

Suggestion box

Which new products would you like to see at PCCG?

Lian Li AL140 V2 Uni Fan ARGB PWM 140mm Black

AL140V21B | Lian Li
$45
In stock
Buy now, pay later!
The Lian Li AL140 V2 Uni Fan ARGB PWM 140mm Black is a modular fan that can be used by itself or connected with up to 6 other fans. It features a daisy chain interlocking mechanism, pin-to-pin contact point for receiving power and signal, fluid dynamic fan bearing, and a controllable fan speed range on 250-1600 RPM via the L-connect software.


Features



Overview

  • Slide in daisy-chain style
  • Improved performance
  • Sophisticated lighting effects
  • Cableless with controller
  • Start/Stop fan
  • L-connect 3 software

Upgraded modularity

UNI FAN AL V2 features an interlocking system to connect up to 6 fans in two clusters to a single controller port, making fan installation and cable management a simple job.
Single cable to controller Combo power and LED cable, reduce cable numbers.
Plug-in power cable module Flush fan frame, reduce clearance issues.
Slide-in mechanism Pin-to-pad contact, daisy chain the fan clusters simply.
Extension cable Bridge 2 fan clusters, keep as minimal cables as possible.
Removable key Remove the interlocking key to improving compatibility.

Thicker yet easy to install

The UNI FAN AL140 V2 has been amended to a slightly thicker frame of 25mm, and implements indented screw holes to fit standard 25mm long screws for installation.

Ultimate performance ARGB fan

Running at peak performance while keeping low noise levels, the UNI FAN AL140 V2 is the best-performing ARGB fan within the entire UNI FAN lineup.

Durable design

Thicker impeller Increased thickness to 25mm for better efficiency.
Magnetic frame To provide extra support for fan blades.
Circlip To secure the fan blades in place.
Extra magnetic force To support the fan blades and reduce vibration levels, thus ensuring low noise levels while in operation.
Fluid dynamic bearing (FDB) To effectively reduce the internal friction for improved durability.
Stator To provide a rotating magnetic field that generates momentum.
Rubber Pads To reduce vibrations and ensure extremely low noise levels.

Dazzling from all angles

UNI FAN AL140 V2 has comprehensive lighting all around with independent control of the effects at the fan blades and a fan frame, and combined lighting effects. Sophisticated lighting on the fan blade glows the whole system. The fine LED strips at the four corners of the fan frame and beside the aluminium sides can be set in different colours, creating an elegant look. A ring of RGB is visible at the rear side, keeping it attractive no matter as intake or exhaust.


More lighting effect choices

New lighting effects have been developed for the updated version of the AL fans offering more lighting options.


Continuous lighting effects

A merge function is available to allow lighting effects to flow not only across a single cluster but across the whole system.

Simple connection

2 ways to connect UNI FAN AL140 V2 fans, adapted to your personal needs.

UNI-HUB: 16 fans in one go

The included controller in the triple pack can support up to 16 fans and 2 x SM type connected devices to simplify cable management and provide efficient power to the fans.

SM type port Compatible with the Galahad AIO pump and ARGB cable and more. Each port supports a 5W maximum output. Sync 4 port replicated the lighting effect applied to port 2.
Fan group ARGB + PWM signal Support one cluster of up to 6 fans.
USB cable Plug into a motherboard 9-pin USB header.
5V ARGB/4-pin PWM cable Required for motherboard sync function.
2 x SATA cable For a total maximum input of 29W. Use the Main-SATA for al circumstances and use the Sub-SATA when connecting more than 12 fans or often set to white static colour.
Please note: lower the static white lighting effect's brightness to 75% when connecting more than 8 x 140 or 11 x 120 AL V2 fans synchronised to the motherboard. Failing to do so may cause inaccurate colours.

Direct to motherboard

The single pack includes a cable module that featureds a 4-pin PWM and a 3-pin SM type ARGB cable (3P to 3P 5V ARGB cable is included) to connect directly to the motherboard.

L-Connect 3 software to control AL-V2 fans

Control and preview with precision the lighting effect of the AL-V2 fans with the new L-connect interface.
Please note: L-Connect 3 is only supported when connecting the fans to an AL-V2 UNI HUB.

  1. Choose to control lighting effects of fan blades/edge of fan/frame both together set set as merge mode.
  2. Set personalised colour/brightness/speed/direction

Intelligent start/stop fan

  1. Select fan mode for each group
  2. Turn on to stop fan operating at a set temperature
  3. Customise real-time RPM curve

Define the order

  1. Define fan group name
  2. Set fan quantity each group
  3. Reorder the fan group order

Specifications


Product Name UNI FAN AL140 V2
Model AL140V2-1B
Colour Black
Number of fans 1
Controller No
Connector type 1 x 4-pin PWM + 3-pin ARGB
1 x ARGB MB Adapter
Fan dimension (W x H x D) 140 x 140 x 25mm
Material PBT/PC/Aluminium
Rated voltage DC 12V (Fan) & 5V (LED)
Fan speed 0, 250-1600 RM
Max. Air Pressure 2.80 mmH2O (Maximum)
Max. Airflow 81.6 CFM (Maximum)
Acoustic noise 26.8dB(A) Max
Bearing type Fluid Dynamic Bearing (FDB)
Operate voltage DC12V & 5V
Input power 6.32W
Backed by a 2 year Lian Li warranty.

Customer reviews

Customer questions