The Arctic P12 PWM PST 120mm Fan is optimised for static pressure, provides strong cooling performance, features an efficient motor, PWM controlled fan with up to 1800 RPM, and a fluid dynamic bearing.
Features
Optimised for static pressure
During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 PWM PST is particularly suitable for use on heatsinks and radiators.
Strong cooling performance
Numerous improvements, such as an updated engine technology and a newly developed fan design, have noticeably increased the performance of P-fans. In internal performance tests leveled to 28 dB (A), the new P-fans left many competitors behind.
More efficient technology
The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without compromising the performance.
Maximum quietness, minimum vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
Extended life span
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years.
200 to 1800 RPM regulated via PWM PST
Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
High quality bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Two way installation
- Push warm air out of case
- Pull cool air into case
Specifications
| Performance |
Fan Speed: 200 - 1800 rpm
Airflow: 56.3 CFM/ 95.7 m³/h
Static Pressure: 2,20 (mm/H2O)
Noise Level: 0.3 Sone |
| Fan |
Fan Frame: Standard
Control Type: PST
Connector: 4-Pin-Connector + 4-Pin-Socket
Fan Bearing: Fluid Dynamic Bearing |
| Electric Characteristics |
Typical Voltage: 12 V DC
Starting Voltage: 3.9 V
Current: 0.08 A
Cable Length: 400 mm |
| Size & Weight |
Length: 120 mm
Width: 120 mm
Height: 25 mm
Weight: 145 g |
Backed by a 10 year Arctic warranty.
