EK Classic Pump Reservoir 160 SPC PWM D-RGB
3831109818510 | EK WaterblocksThis product has been discontinued
Features
The core of the unit is the EK-SPC 60 water pump that uses only a 4-pin PWM FAN header for operation. No other additional connector is required! Full PWM support will allow you to set automatic pump speed regulation depending on your temperatures. Full performance on demand or whisper-quiet operation in idle mode! With a maximum head pressure of 2.2m (7.2ft), and a maximum flow of 250L/h in a very compact form.
EK-Classic Reservoir Combo 160 SPC PWM D-RGB series pump-reservoir combo comes with a pre-installed anti-cyclone insert.
Specifications
Motor | Electronically commuted motor |
Rated voltage | 12V DC |
Power consumption | 6W |
Maximum pressure head | 2.2m |
Maximum flow | 250L/h |
Maximum system temperature | 50°C |
Materials | PPS-GF30, EPDM O-rings, Aluminium oxide, graphite |
Power connector | 4-Pin PWM FAN connector |
D-RGB connector | 3-pin 5V (+5V, Data, Blocked, Ground) |
PWM duty cycle | ~ 20-100% |
Default behavior | Runs at 100% duty cycle when no PWM feedback signal is present |
Threads | G1/4 |
Enclosed | Pump reservoir combo unit 120mm fan hole pattern mounting frame |
Note | The SPC pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry. This product is NOT compatible with DDC Heatsink Housing! The EK-UNI Pump Bracket bracket is included with the unit. |