PrimoChill Sys Prep - 15ml Bottle

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.

It will "flush" your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear and ready for any type of coolant.

Features:

• Water Based
• Non Toxic
• Pre-Mixed. Just add to a gallon of water and get flushing!
• Safe on all plastics, rubbers, and miscellaneous gasket materials, including Acrylic
• Non filming system cleanser

Specifications:

• Bottle Size: 15ml
• Shelf Life: 2 Years, Unopened

Mixing Instructions:

• 1. Install your cooling loop and double-check connections to insure loop is closed.
• 2. Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
• 3. Add mix to cooling loop.
• 4. Fill loop with treated water and be sure to remove as many air bubbles as possible.
• 5. Start loop pump and begin circulating the treated water.
• 6. Run treated water for at least 12 hours to insure loop is properly flushed and treated.
• 7. Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
• 9. Fill loop with your choice of coolant and begin water-cooling.**