Gigabyte B760M DS3H DDR4 Motherboard

The Gigabyte B760M DS3H DDR4 Motherboard supports 12th/13th/14th Gen Intel Core processors, Pentium Gold and Celeron processors and LGA 1700 sockets, features up to 4 x DDR4 memory, PCIe 4.0 and 3.0 compatible expansion slots. 2 x M.2 slots, 4 x SATA ports (6Gb/s), 6 x rear USB ports, 3 x front panel USB header ports, Realtek 2.5Gb LAN, Realtek HD audio codec and a micro-ATX motherboard form factor.

Warning: This product contains a button battery - If swallowed, a lithium battery can cause severe or fatal injuries with 2 hours. - Keep batteries out of reach of children. - If you think batteries may have been swallowed or placed inside any of the body, seek immediate medical attention.

Features

---

B760M DS3H DDR4 (Rev. 1.0)

• Supports Intel® Core™ 14th/ 13th /12th processors
• Unparalleled Performance: Hybrid 6+2+1 Phases Digital VRM Solution
• Dual Channel DDR4: 4*DIMMs XMP Memory Module Support
• Next Generation Storage: 2*PCIe 4.0 x4 M.2 Connectors
• M.2 Thermal Guard: To Ensure M.2 SSD Performance
• EZ-Latch: PCIe 4.0x16 Slot with Quick Release Design
• Fast Networks: 2.5GbE LAN
• Extended Connectivity: Rear USB-C® 10Gb/s, DP, HDMI
• Smart Fan 6: Features Multiple Temperature Sensors, Hybrid Fan Headers with FAN STOP
• Q-Flash Plus: Update BIOS Without Installing the CPU, Memory and Graphics Card

Performance

• 8 Solid Pin CPU Power Connector
• 2 x M.2 Ultra Storage Performance Connectors
  2*PCIe 4.0 x4 M.2
  1*Thermal Guard
• Audio Solution
  8-ch HD Audio
  Audio Noise Guard
  High-End Audio Capacitors
• 6+2+1 Hybrid Digital VRM Design
  PCIe 4.0 Ready PCB
  Premium Choke and Capacitor
• Support 13th and 12th Gen. Intel® Core™ Processors
• Dual Channel DDR4, 4 DIMMs
• Full PCIe 4.0 Design
  1*PCIe 4.0 x16 slot
  2*PCIe 4.0 x4 M.2 Connectors
  PCIe EZ-Latch

Connectivity

• D-Sub
• HDMI
• 2*DisplayPort
• Rear USB 3.2 Gen 2 Type-C®
• 2.5 GbE LAN
• Q-FLASH Plus Onboard Button
• 4*SATA 3
• RGB FUSION
  1*Addressable LED Header
  1*RGB LED Header
• Multi-Key
  Multiple function set by BIOS
  Reset/RGB Switch/Direct to BIOS/Safe Mode

Performance - Hybrid Digital VRM Design

6+2+1 Phases Hybrid Digital VRM Design

• 6+2+1 Phases Low RDS(on) MOSFETs
• Premium Choke and Capacitors to improve transient response and minimise oscillation

PCIe 4.0 Design

GIGABYTE B760 Motherboards are ready to work with the PCIe 4.0 devices which are expected to experience triple bandwidth than the current PCIe 3.0 devices. To reach the high speed and maintain good signal integrity, GIGABYTE R&D uses the low impedance PCB to provide the maximum performance.

• PCIe 4.0 M.2 Slots
• PCIe 4.0 x16 Slot
• 3.3x Higher - PCIe 4.0 Slot - Slot Signal Stability(Based on PCIe 4.0 differential impedance specification)

DDR4 XMP

Support for DDR4 XMP Up to 5333MHz and Beyond*

GIGABYTE is offering a tested and proven platform that ensures proper compatibility with profiles up to 5333MHz and beyond. All users need to do to attain this performance boost is to ensure that their memory module is XMP capable and that the XMP function is activated and enabled on their GIGABYTE motherboard.

* XMP Profile support may vary depending on memory module. Please see the complete validated memory support list. Product features may vary by model.

Shielded Memory Routing

All memory routing is under the PCB inner layer shielded by a large ground layer to protect from external interference.

• Up to 64 Gb/s(Theoretical Bandwidth) - PCle 4.0 x4 M.2
• 7000 MB/s(NVMe SSD Read Performance) - 2nd Gen PCIe 4.0 SSD

Gigabyte PerfDrive

PerfDrive technology integrates multiple GIGABYTE exclusive BIOS settings to allow users to balance between different levels of performance, power consumption, and temperature according to their needs easily when using 13th gen Intel® Core™ processors.

Max Turbo

Max Turbo allows Intel® 13th Gen. Core™ CPU to run at Maximum Turbo Boost speed.

Optimisation

The Optimisation mode enables Intel® 13th Gen. Core™ CPU to balance between high performance and low temperature.

Spec Enhance

The Spec Enhance mode enables Intel® 13th Gen. Core™ CPU to run at high performance under a lower temperature setting.

E-Core™ Disable

The E-Core™ Disable mode allocates CPU resources to P-core exclusively to boost its gaming performance, while diminishing the overall power consumption of processors.

* Features and function vary depending on Motherboard and CPU specifications.

Thermal

M.2 Thermal Guard

Gigabyte Ultra-Efficient M.2 Thermal Guard

With durability in mind, GIGABYTE provides a thermal solution for M.2 SSD devices. The M.2 Thermal Guard prevents throttling and bottlenecks from high speed M.2 SSDs as it helps to dissipate heat before it becomes an issue.

Smart Fan 6

Smart Fan 6 contains several unique cooling features that ensure gaming PC maintain its performance while staying cool and quiet. Multiple fan headers can support PWM/DC fan and pump, and users can easily define each fan curve based on different temperature sensors across the board via intuitive user interface.

• PWM/DC Fan Headers
• Internal Temperature Sensors

Cooling Features

High Current Support

Each fan headers support PWM and DC fan and Water Cooling Pump , and up to 24W (12V x 2A) with Over-Current Protection

Precision Control

Multiple temperature/fan speed control points for precise fan curve

Dual Curve Mode

Slope/Stair dual mode for different user scenario

Fan Stop

Fan can stop completely below users' specified temperature point

Smart Fan 6 BIOS UI

Improve Fan Curve UI

We increase control points from 5 to 7 and larger fan speed graph for precise and easier fan curve control.

Slope/Stair Dual Graph Mode

Fan curve can be quickly switch with Slope and Stair modes for different user scenario. Slope is traditional and intuitive linear fan speed curve. With newly added Stair non-linear mode, fan keeps at same speed between specified temperature interval.

Manual Input

For advanced users, we provide fan speed manual input for more precise control.

EZ Tuning

Use can place 4 EZ Tuning points at rough temperature/fan speed, and Smart Fan 6 can quickly generate a fan curve.

Fan Curve Profile

Fan curve profile can be saved in BIOS ROM, profile will be kept after updating BIOS.

Connectivity - 2.5GbE LAN

GIGABYTE Motherboards enable the ultimate connection experience with blazing data-transfer speeds through the next generation network and storage.

First Adopter on 2.5 GbE LAN Onboard

2X Faster than Ever

• Adoption of 2.5G LAN provide up to 2.5 GbE network connectivity, with at least 2X faster transfer speeds compared to general 1GbE networking, perfectly designed for gamers with ultimate online gaming experience.
• Support Multi-Gig(10/100/1000/2500Mbps) RJ-45 Ethernet

Rear USB-C® 20Gb/s

Connecting the Future - USB 3.2 Gen 2 Type-C®

The World's Next Universal Connector

The USB Type-C® is a new reversible connector that is loaded with useful features such as USB 3.2 Gen 2 support for 10Gb/s transfer speed. Powered by the Intel® USB 3.2 Gen 2 controller, this little port provides the best USB Type-C® experience possible.

Hi-Fi Audio

High-End Audio Capacitors

GIGABYTE motherboards use high-end audio capacitors. These high quality capacitors help deliver high resolution and high fidelity audio to provide the most realistic sound effects for gamers.

Audio Noise Guard

GIGABYTE motherboards feature an audio noise guard that essentially separates the board’s sensitive analogue audio components from potential noise pollution at the PCB level.

Personalisation

GIGABYTE motherboards bundle several useful and intuitive software to help users to control every aspect of motherboard and provide customisable lighting effect with outstanding aesthetics to fit your unique personality.

UEFI BIOS

Friendly User Interface

The EASY MODE shows important hardware information in one page including CPU clock, Memory, Storage, Fan.

My Favourites

Add constantly used items into the favourite menu for quick access.

Storage Information

Show all kinds of storage information including SATA, PCIE and M.2 interface.

Changelog

List all changes before saving and exiting bios. Quickly review overall settings modification.

Intuitive Load Line Curve

Clearly show each loadline calibration setting in an intuitive curve graph.

Gigabyte Control Center

GIGABYTE CONTROL CENTER (GCC) is a unified software for all GIGABYTE supported products. It provides newly designed intuitive user interface to control all essential function.

• Unified software platform for all Gigabyte supported products
• Intuitive user interface for an eased experience
• Modularised control components only for installed hardware
• Auto update function to keep system up to date and support future products

Multi-Key

A multi-function reset button that can be reconfigured to other function in BIOS for different user scenarios.

RGB Switch

Turn off all lighting effect on motherboard.

Direct-to-BIOS

Boot into BIOS menu directly without pressing any keyboard button.

Safe Mode

Boot into BIOS safe mode to change specific option without losing other BIOS settings.

* Photo for reference only.

Ultra Durable

DIY Friendly

PCIe EZ-Latch

Unlock the latch of the PCIe slot easily when remove the graphics card in the PCIe slot.

* Photo for reference only.

Q-Flash Plus

Update the BIOS Easily without Installing the CPU, Memory and Graphics Card.

With GIGABYTE Q-Flash Plus, you don't need to install the CPU, memory and graphics card nor enter the BIOS menu to flash the BIOS. Just download and save a new BIOS file (rename to gigabyte.bin) on the USB flash drive, then press the dedicated Q-Flash Plus button and you’re good to go!

Step 1

Plug 24pin & 8pin power supply cable on motherboard

Step 2

Download motherboard BIOS file and rename to "gigabyte.bin", save to USB flashdrive, and plug USB flashdrive into Q-Flash USB port

Step 3

Press Q-Flash Plus button, and motherboard will start updating BIOS automatically.