Suggestion box

Which new products would you like to see at PCCG?

EK Quantum Kinetic FLT 240 D5 PWM DRGB Plexi

3831109819791
$325
Check back later!
Buy now, pay later!
The EK Quantum Kinetic FLT 240 D5 PWM DRGB Plexi is a new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump. It is equipped with a genuine D5 pump which is made in Europe, and are capable of delivering flow rates of 1500 liters per hour with a maximum head pressure up to 3.9 meters.

Features



The new flat-shaped pump-reservoir units are to revolutionize the way you were thinking about combo units and loop building. Since 120mm fan mounting patterns are the most dominant mounting options inside PC cases these days, these new Kinetic FLT D5 combo units will allow greater flexibility for installation since they don't require drilling of new mounting holes on your case.

The combo unit is equipped with a total of six industry-standard G1/4" ports, which can be, based on the orientation of the unit, used as inlet and outlet ports, as well as fill and drain ports.

The reservoir is manufactured of premium quality acrylic material, machined to perfection, while the sealing is performed by a quality EPDM o-ring. Alongside the reservoir is a black anodized aluminum cover under which the Addressable D-RGB LED strip is placed. Proper LED implementation is one of the main focus points of EK so that there are as few visible "LED hotspots" as possible.

Dimensions


Specifications


Technical Specifications - Size (HxWxT): 245x120x86mm (with the mounting system)
- Capacity: ~265ml
- D-RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, Blocked, Ground)
Pump Electrical and Mechanical Properties - Motor: Electronically commuted spherical motor
- Rated voltage: 12V DC
- Power consumption: 23W
- Maximum pressure head: 3.9m
- Maximum flow: 1500L/h
- Maximum system temperature: 60°C
- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
- Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector
Operational Regime - PWM duty cycle: ~ 20-100%
- Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present
Box Contents - EK-Quantum Kinetic FLT 240 PWM D5 D-RGB
- Mounting mechanism with all necessary screws for 120mm fan mounting
- Pair of EK reservoir holders with mounting screws
- 4 × G1/4 Plugs
- 1 × Allen key for reservoir holders
Threads G1/4
Notes Do not clean the reservoir with alcohol derivates or other solvents as the acrylic may crack!
Coolant and additional plugs are just for showcase and are not delivered with the product!
The D5 pump is water lubricated, in other words, it uses a wet rotor design. Therefore, it is strongly recommended not to run the pump dry.
Backed by a 2 year EK warranty.

Customer reviews

Customer questions