Thermaltake Floe RC240 CPU and Memory A-RGB AIO Liquid CoolerCL-W271-PL12SW-A
This product has been discontinued
The Floe RC is the worlds first-ever CPU and memory liquid cooling all-in-one solution. It provides exceptional cooling performance for both CPU and RAM, and pairs with TOUGHRAM RC memory modules.
Exclusive All-In-One Design
The Floe RC is a high-quality all-in-one cooling solution, which includes water blocks, radiator, aRGB controller, and high airflow 120mm fans. This cooler is compatible with TOUGHRAM RC memory modules and the Floe RC provides a simple and intuitive all-in-one solution that grants users unparalleled cooling performance. Please note the Floe RC only pairs with TOUGHRAM RC memory modules (sold separately).
Exceptional Cooling Performance
The Floe RC is Optimised for CPU and RAM cooling and the flow design runs through the CPU waterblock, radiator and then memory waterblock to achieve maximum cooling efficiency and thermal dissipation.
Memory Temperature Comparison
The Floe RC All-In-One CPU & Memory cooler is designed to decrease the heat generated by RAM while operating under full load. To demonstrate this Thermaltake set up a testing environment with a dual channel ToughRAM RC kit, running at both stock (3200Mhz) and overclocked (3700Mhz) speeds. Every system is different, and there are various testing elements that can be quite variable depending on the system setup.
16.8M RGB Illumination for Memory Waterblock
The memory waterblock comprises of four lighting strips, delivering 16.8M RGB colours across 36 super-bright addressable LEDs for stunning RGB illumination.
Durable 120mm ARGB Radiator Fan
Floe RC’s PWM controlled fan is engineered to generate high pressure without compromising on ultra-silent operation.
High Efficiency Radiator
The Floe RC's fin density is designed to accommodate high air volume, which improves cooling performance significantly when using its high static pressure fan to speed up heat dissipation.
High Performance Waterblock
The high performance waterblock enables maximum water circulation, keeping the copper base plate continuously cool and accelerating heat conductivity.
High Reliability Pump
To avoid complicated plumbing, the Floe RC comes pre-filled with a low evaporation tube that can effectively decrease coolant evaporation.
Paired with TOUGHRAM RC
The Floe RC requires TOUGHRAM RC memory modules to pair with and the ICs are thoroughly-screened for optimal frequency and response times. On top of that, you can also monitor real-time temperature, frequency and performance.
RGB Sync Software Supported
The cooler is designed to synchronise with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync and ASRock Polychrome. The Floe RC supports motherboards equipped with a 5V addressable RGB header, allowing you to control lighting effects directly. Other than that, it has 7 preset lighting modes including wave, full light, RGB spectrum, flow, ripple, pulse and blink modes, which are easy to switch between even without a 5V addressable RGB header on your motherboard.
Featuring superb cooling performance, the Floe RC provides easy installation and maintenance-free operation, requiring only a minimal amount of space in the chassis.
|Memory Type||TOUGHRAM RC Series|
|Compatibility||CPU Socket: Intel LGA 2066/20113/2011/1366/1200/1156/1155/1151/1150
Memory: TOUGHRAM RC Series
|Water Block Material||Copper|
|Pump||Motor Speed 3200 RPM
Rated Voltage 12 V & 5V
Power Input 12V – 4.56 W , 5V – 1.25 W
|Memory Water Block||Rated Voltage 5V
Power Input 8W
|Fan||Dimension 120 x 120 x 25 mm
Speed PWM 500~1500 R.P.M (2510-4PIN)
Noise Level 28.2 dB-A
Power Input 12V – 2.88 W ,5V – 0.7W (one fan)
Rated Voltage 12 V & 5V
Max. Air Flow 59.28 CFM
Max. Pressure 1.31 mm-H2O
LED Control ARGB controller or 5V addressable RGB header on motherboard
|Radiator||Dimension 273 x 120 x 27 mm
|Tube||Length 410 mm