Koolance RP-452X2 Reservoir for PMP-450/S Pumps Rev.1.3
RP-452X2-13 | KoolanceThis product has been discontinued
The Koolance RP-452X2 is a dual 5.25" bay reservoir designed for one or two Koolance PMP-450 or PMP-450S pumps (sold separately). Using a convenient side plug, the front reservoirs can be separated or combined without disassembling the unit. Both front and top fill ports are available for each reservoir. Easily combine Koolance's highest flow pumps into dual or serial/redundant loops.
Machined from a solid piece of acetal for maximum reliability, the RP-452X2 has a thick acrylic window and front aluminum bezel. Two sets of G 1/4 BSP threaded inlet and outlets appear on the back, designated "P1" and "P2" for each pump. If one pump is used, an acetal blocker is included to occupy the second pump location.
There are four pre-drilled holes for the addition of 3mm LEDs around the acrylic window. CD bay mounting screws and pump attachment hardware are included. Capacity per reservoir = approx. 5.3 fl oz (158ml). Weight without pumps = 2.7 lbs (1.2kg). Total dimensions = 5.8" (14.8cm) W x 5.4" (13.6cm) L x 3.3" (8.5cm) H.
Machined from a solid piece of acetal for maximum reliability, the RP-452X2 has a thick acrylic window and front aluminum bezel. Two sets of G 1/4 BSP threaded inlet and outlets appear on the back, designated "P1" and "P2" for each pump. If one pump is used, an acetal blocker is included to occupy the second pump location.
There are four pre-drilled holes for the addition of 3mm LEDs around the acrylic window. CD bay mounting screws and pump attachment hardware are included. Capacity per reservoir = approx. 5.3 fl oz (158ml). Weight without pumps = 2.7 lbs (1.2kg). Total dimensions = 5.8" (14.8cm) W x 5.4" (13.6cm) L x 3.3" (8.5cm) H.
