Braided expandable sleeving is the ideal solution for tidying up case wiring and achieving a professional look in your PC case. The ’wide’ size has a nominal diameter of 10mm and...

Braided expandable sleeving is the ideal solution for tidying up case wiring and achieving a professional look in your PC case. The light, flexible sleeving installs easily and...

Black body and actuator, designed for installation into a round 20mm opening, 10amps @ 250VAC, Q.C. tab termination for easy installation and 2 terminal connections.

Only 3metres left. Braided expandable sleeving is the ideal solution for tidying up case wiring and achieving a professional look in your PC case. The ’narrow’ size has a nominal...

Only 1metre left. Braided expandable sleeving is the ideal solution for tidying up case wiring and achieving a professional look in your case. The light, flexible sleeving...

Braided expandable sleeving is the ideal solution for tidying up case wiring and achieving a professional look in your PC case. The light, flexible sleeving installs easily and...

25mm wide for ATX cables, and also for bundling several cables together - eg 2 or 3 Molex cables, a bunch of fan or CCFL cables. 2m in length.

The AC Ryan Heatshirnkz is a multi-purpose UV tubing sleeve for bundling several cables togther. 1m in length.

Twin 10cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights come pre-wired with molex...

Twin 10cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights come pre-wired with molex...

Twin 10cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights come pre-wired with molex...

Twin 20cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights come pre-wired with molex...

Twin 20cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights comes pre-wired with molex...

Twin 20cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights come pre-wired with molex...

Twin 20cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights come pre-wired with molex...

Twin 20cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights comes pre-wired with molex...

Twin 30cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights come pre-wired with molex...

Twin 30cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights comes pre-wired with molex...

Twin 30cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights come pre-wired with molex...

Twin 30cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights come pre-wired with molex...

Twin 30cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights comes pre-wired with molex...

Twin 30cm cold cathode lights with dual output inverter and switch. In addition to the acrylic enclosure, mounting cubes and boxed inverter, the lights comes pre-wired with molex...

Bitspower UV-Reactive cable sleeve kit transforms to a brilliant blue colour when exposed to UV lighting. The kit includes 150cm sleeve of UV-reactive material, 30cm roll of...

Bitspower UV-Reactive cable sleeve kit transforms to a brilliant green colour when exposed to UV lighting. The kit includes 150cm sleeve of UV-reactive material, 30cm roll of...

Bitspower UV-Reactive cable sleeve kit transforms to a brilliant red colour when exposed to UV lighting. The kit includes 150cm sleeve of UV-reactive material, 30cm roll of...

Bitspower UV-Reactive cable sleeve kit transforms to a brilliant yellow colour when exposed to UV lighting. The kit includes 150cm sleeve of UV-reactive material, 30cm roll of...

100mm Black Cable Ties. Ideal for tidying up wiring in the case. Comes in a pack of 20.

100mm off-white cable ties. Ideal for tidying up wiring in your case. Comes in a pack of 100.

Reduced to clear! (normally $2.00) Pack of 10 green colored cable ties.

Cold Cathode cables not long enough? Extend them with this 30cm cathode extension cable.

This kit consists of two 3mm Blue LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Especially good combination with the EK Supreme...

This kit consists of two 3mm green LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Especially good combination with the EK Supreme...

This kit consists of two 3mm red LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Especially good combination with the EK Supreme Plexi...

This kit consists of two 3mm Ultra UV LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Especially good combination with the EK Supreme...

This kit consists of two 3mm white LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Especially good combination with the EK Supreme...

This kit consists of two 5mm Blue LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Cable length: ~29cm approximately.

This kit consists of two 5mm green LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Cable length: ~29cm approximately.

This kit consists of two 5mm red LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Cable length: ~29cm approximately.

This kit consists of two 5mm Ultra UV LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Cable length: ~29cm approximately.

This kit consists of two 5mm white LEDs pre-tailed with a 4pin molex connector for easy connection direct to your power supply. Cable length: ~29cm approximately.

Case Fan mounting screws. Comes in a pack of 4.

10mm heatshrink. Sold in 1.2 metre lengths. Shrinks by up to 50% of its original width.

10mm heatshrink. Sold in 1.2 metre lengths. Shrinks by up to 50% of its original width

10mm heatshrink. Sold in 1.2 metre lengths. Shrinks by up to 50% of its original width.

10mm heatshrink. Sold in 1.2 metre lengths. Shrinks by up to 50% of its original width.

6mm heatshrink. Sold in 1.2 metre lengths. Shrinks by up to 50% of its original width.

6mm heatshrink. Sold in 1.2 metre lengths. Shrinks by up to 50% of its original width.

The Lamptron Elite inverter combines the functions of two inverters in one, providing 4 output ports. It also replaces the plastic box of your existing inverter with a sleek black...

Designed to extract pins from 4 and 8 pin EPS (12V), ATX connectors, and all PCI-E connectors on your power supply. Adding aftermarket sleeving or UV reactive plugs to your PSU is...

The Lamptron Spectral Bar is the latest in CCFL lighting. Provides widespread light output and uses an integrated inverter - which means less clutter inside your case. 23.5mm x...

The Lamptron Spectral Bar is the latest in CCFL lighting. Provides widespread light output and uses an integrated inverter - which means less clutter inside your case. 23.5mm x...

Pack of 5 multicolored velcro cable straps. A great alternative to cable ties, these can also be used to colour code power plugs so you don't unplug the wrong thing. 150mm in...

The Nexus PCI-300 PCI-Slot ventilation bracket covers are a simple solution to allow more air in or out of your case. Is the inside of your PC case heating up? Could it use some...

No loose cables in your computer case anymore. These Nexus CT-600 Velcro cable ties are easy to use and make the inside of your case look clean and tidy. Features: - Soft and...

On sale! (was $0.85) UV Reactive Female Molex Connector - Green. Glows brightly like neon when placed near a UV light source.

On sale! (was $0.85) UV Reactive Female Molex Connector - Yellow. Glows brightly like neon when placed near a UV light source.

Reduced to clear! (was $7.00) Removing the power from devices inside your computer can be difficult with standard molex plugs. The protrusions on the side of the molex are...

We recommend you use wiring loom to tidy up the cables and wiring in your case, improving airflow and generally making the case easier to work in. Messy wiring not only...

The Polydome DIY Case Badge Kit includes six sticky polydome pieces and six pieces of white sticky paper to print on. Simply print on the paper, stick the polydome to the paper...

UV Reactive Female Molex Connector - Red. Glows brightly like neon when placed near a UV light source. Slip-free double-sided curved clips make it easy to plug and unplug.